Top 10 Track Saws in 2027 — Best Overall + Best Value

Direct Answer

For 2027, the Best Overall track saw is the Festool TS 60 KEB at $725 (bare) — it pairs a 6-5/8 inch blade, a class-leading 2-7/16 inch cut depth, integrated KickbackStop safety, and the most refined guide-rail system money can buy. The Best Value pick is the Makita XPS01 36V cordless track saw at $465 for the kit, which delivers near-Festool plunge smoothness and clean splinter-free edges for roughly a third of the premium price.

This list is for woodworkers, finish carpenters, and remodelers who want straight, table-saw-quality cuts in plywood, MDF, and solid hardwood without lugging full sheets across a table saw. Whether you live inside the Festool ecosystem or want an affordable cordless rail saw, there is a pick below for you.

How We Ranked the Top 10

We weighted each saw on the factors that actually matter when you are breaking down sheet goods and trimming doors all day. We cross-referenced hands-on testing and spec sheets from Pro Tool Reviews, Wood Magazine, ToolGuyd, Fine Woodworking, Tool Box Buzz, A Concord Carpenter, and the official Festool, Makita, DEWALT, Bosch, Milwaukee, and Kreg spec pages.

• Cut quality and accuracy — 25%
• Track system and compatibility — 20%
• Cut depth and bevel range — 15%
• Dust collection — 15%
• Corded vs cordless and safety — 15%
• Price-to-performance — 10%

1. Festool TS 60 KEB 🏆 BEST OVERALL

Price: $725 | Best for: Pro woodworkers and cabinet shops who want the deepest, cleanest cuts

The Festool TS 60 KEB is the corded flagship and the benchmark every other track saw is measured against. It runs a 6-5/8 inch blade spun by a brushless EC-TEC motor up to 6,800 RPM, and it delivers a 2-7/16 inch cut depth at 90 degrees — the deepest on this list — with a bevel range of negative 1 to 47 degrees.

Festool's integrated KickbackStop electronically halts the blade on bind-up, and the saw rides Festool's FS guide rail with near-zero deflection and the cleanest splinter-free edge in the category. Dust extraction through the 27/36mm port approaches near-total capture when paired with a CT vac.

Pros:

• Deepest cut depth on the list at 2-7/16 inches
• KickbackStop anti-kickback safety standard
• Best-in-class splinter-free edge quality
• Tool-free, repeatable bevel and depth micro-adjust

Cons:

• Guide rail is sold separately on the bare configuration
• Premium price the value crowd will balk at

Verdict: The Festool TS 60 KEB is the most accurate, deepest-cutting, safest track saw you can buy in 2027 — the clear Best Overall.

2. Festool TS 55 FEQ-F

Price: $575 | Best for: Furniture makers who want Festool precision in a lighter package

The TS 55 FEQ-F is the lighter, more nimble Festool that built the brand's reputation. It uses a 6-1/4 inch (160mm) blade, cuts 2-1/8 inches at 90 degrees and 1-11/16 inches at 45 degrees, and tilts from negative 1 to 47 degrees. The thin-kerf blade, riving-knife splinter guard, and the same buttery FS rail glide give it edges that come off the saw ready to glue.

Dust collection is excellent, and the saw is noticeably easier to maneuver overhead than the deeper TS 60.

Pros:

• Lighter and more maneuverable than the TS 60
• Thin-kerf blade for faster, cleaner cuts
• Riving-knife splinter guard included
• Full Festool rail and accessory compatibility

Cons:

• Shallower cut depth than the TS 60
• Rail still costs extra on bare versions

Verdict: The TS 55 FEQ-F is the Festool to buy if you value agility over maximum depth.

3. Makita XPS01 💎 BEST VALUE

Price: $465 | Best for: Buyers who want cordless freedom and Festool-grade cuts on a budget

The Makita XPS01 is the cordless rail saw that punches far above its price. Running two 18V LXT batteries for 36V power, it spins a 6-1/2 inch blade at a variable 2,500 to 6,300 RPM, cuts 2-3/16 inches at 90 degrees, and bevels from negative 1 to 48 degrees with positive stops at 22.5 and 45.

The plunge is glass-smooth, the electric brake is quick, and reviewers at Pro Tool Reviews and Tool Box Buzz consistently rate its edge quality just a hair behind Festool. It rides Makita's own rail, which is cross-compatible with Festool, Bosch, and Triton tracks, so you are not locked in.

Pros:

• Cordless 36V power with near-Festool cut quality
• Huge value at $465 for the kit
• Rail cross-compatible with Festool and Bosch
• Variable speed plus electric brake and soft start

Cons:

• Needs two batteries to run, doubling charge management
• Rail sold separately on tool-only versions

Verdict: The Makita XPS01 delivers 90 percent of the Festool experience for roughly a third of the price — our Best Value pick.

4. DEWALT DCS520 60V FLEXVOLT

Price: $499 | Best for: Job-site pros already on the DEWALT FLEXVOLT platform

The DEWALT DCS520 brings serious cordless muscle on the 60V MAX FLEXVOLT battery. It runs a 6-1/2 inch blade at 1,750 to 4,000 RPM, cuts 2-1/8 inches at 90 degrees and 1-5/8 inches at 45 degrees, and tilts to 47 degrees. DEWALT's parallelogram plunge mechanism keeps the saw flat through the cut, and a continuous anti-kickback mechanism plus a riving knife add safety.

The magnesium base feels stout, dust capture is rated around 90 percent, and the kit price undercuts most cordless rivals.

Pros:

• Strong 60V FLEXVOLT corded-like power
• Riving knife and continuous anti-kickback standard
• Parallelogram plunge stays flat and accurate
• Aggressive kit pricing at $499

Cons:

• Heavier at 12.5 lbs than the Makita
• DEWALT rail not natively cross-brand compatible

Verdict: The DCS520 is the cordless workhorse for crews already invested in FLEXVOLT batteries.

5. Milwaukee M18 FUEL 2831-20

Price: $379 | Best for: Milwaukee M18 users wanting one battery platform on site

The Milwaukee M18 FUEL 2831-20 is the rail saw for the red-tool ecosystem. Its POWERSTATE brushless motor drives a 6-1/2 inch blade up to 5,600 RPM with variable speed, cuts a full 2 inches deep, and rips solid hardwood with over 90 percent dust collection. REDLINK PLUS electronics protect against overload and overheating, the plunge is smooth and accurate, and a single M18 HIGH OUTPUT 6.0Ah battery powers it alongside the rest of your M18 fleet.

It is a strong, no-compromise cordless option for one-battery job sites.

Pros:

• Runs on a single M18 battery
• Over 90 percent dust collection
• POWERSTATE motor rips hardwood cleanly
• REDLINK PLUS overload protection

Cons:

• Slightly shallower 2 inch cut depth
• Bare-tool price climbs once you add rail and battery

Verdict: The M18 FUEL is the obvious pick if your job site already runs on Milwaukee batteries.

6. DEWALT DWS520 Corded

Price: $489 | Best for: Shops wanting unlimited corded runtime without battery management

The DEWALT DWS520 is the corded counterpart to the DCS520 and a long-time favorite for all-day runtime. A 12-amp, 1,300-watt motor spins the 6-1/2 inch blade up to 4,000 RPM, cutting 2-1/8 inches at 90 degrees and 1-5/8 inches at 45 degrees, with a bevel range to 47 degrees.

The zero-clearance dual-edge track lets you cut in both directions, a continuous anti-kickback mechanism keeps it safe, and the 1-1/4 inch port pulls about 90 percent of dust. Ergonomics and grip comfort earn praise from A Concord Carpenter.

Pros:

• Unlimited corded runtime
• Dual-edge zero-clearance track cuts both ways
• Continuous anti-kickback mechanism
• Comfortable, well-balanced ergonomics

Cons:

• 9 ft cord limits reach without an extension
• No riving knife on the corded version

Verdict: The DWS520 is the value corded choice for shops that never want to charge a battery.

7. Bosch GKT13-225L

Price: $599 | Best for: Carpenters who want corded precision and cross-brand rail compatibility

The Bosch GKT13-225L is a precise, well-built corded saw that quietly competes with Festool on cut quality. It ships with a 48-tooth 6-1/2 inch blade, uses a single pivot point for bevel and straight cuts from negative 1 to 47 degrees, and includes a spindle lock, lock-off mechanism, and swiveling dust port.

Constant electronics hold speed under load for clean edges. A standout feature: pop out a plastic insert on the shoe and the Bosch fits Makita, Triton, and Festool tracks, making it one of the most flexible saws here.

Pros:

• Cross-compatible with Festool, Makita, and Triton rails
• Constant electronics hold speed under load
• Negative 1 to 47 degree bevel range
• Comes in an L-BOXX organizer case

Cons:

• Higher price for a corded saw
• Rails often sold separately

Verdict: The Bosch GKT13-225L is the smart pick if you want corded precision without rail lock-in.

8. Kreg Adaptive Cutting System Saw

Price: $349 | Best for: Hobbyists who want a guided cutting system, not just a saw

The Kreg ACS-SAWBB pairs with Kreg's 62 inch Adaptive Cutting System guide track to function as both a track saw and the heart of a full project table. It uses a 12-amp motor with variable speed and an electronic brake, cuts 2-1/8 inches deep, and bevels from negative 1 to 47 degrees with a 48-tooth blade.

Safety is strong for the price: a fully shrouded blade, retractable riving knife, and anti-kickback features all come standard. The blade-left design favors right-handed users and improves cut-line visibility.

Pros:

• Retractable riving knife and full anti-kickback
• Integrates with the broader ACS project-table system
• Variable speed and electronic brake
• Affordable $349 entry

Cons:

• Rail and table components add up quickly
• Best value only within the Kreg ACS ecosystem

Verdict: The Kreg ACS is ideal for hobbyists who want a guided system, not just a standalone saw.

9. Festool TSC 55 KEB Cordless

Price: $650 | Best for: Festool loyalists who want flagship cuts without a cord

The Festool TSC 55 KEB brings the TS 55's precision to a cordless dual 18V platform. It runs a 6-1/4 inch (160mm) thin-kerf 42-tooth blade, cuts 2-1/8 inches at 90 degrees and 1-11/16 inches at 45 degrees, and tilts from negative 1 to 47 degrees. The thin-kerf design removes less material for a 50 percent faster cut and 25 percent less sawdust, and KickbackStop safety is built in.

Fine Homebuilding rated it the best overall cordless track saw, and it delivers roughly 100 meters of cutting per charge.

Pros:

• Festool flagship cut quality, cordless
• Thin-kerf blade cuts faster with less waste
• KickbackStop safety included
• About 100 meters of cutting per charge

Cons:

• Premium price for a cordless saw
• Two batteries required to run

Verdict: The TSC 55 KEB is the cordless Festool for those who refuse to compromise on edge quality.

10. WEN 36725 Budget Track Saw

Price: $129 | Best for: Occasional DIYers who need clean cuts on a tight budget

The WEN 36725 (successor to the discontinued CT1065) is the entry point for anyone who wants plunge-track cuts without a pro-level spend. It runs a 6-1/2 inch 24-tooth blade on a 10-amp motor at up to 5,500 RPM, cuts roughly 2-1/3 inches at 90 degrees and 1.65 inches at 45 degrees, and bevels from 0 to 45 degrees.

It is light at about 8.7 lbs, glides easily through 3/4 inch plywood, and handles occasional hardwood, though it labors in dense stock. For the price, the splinter-free edge surprises.

Pros:

• Unbeatable budget price near $129
• Light 8.7 lb sidewinder design
• Glides cleanly through plywood and sheet goods
• Plunge action with depth presets

Cons:

• No riving knife and limited 0 to 45 bevel range
• Struggles in dense hardwood and thicker stock

Verdict: The WEN 36725 is the budget gateway for DIYers who want guided cuts without spending hundreds.

Buyer Decision Tree — Which One's Right for You?

What to Look For When Buying a Track Saw

• Cut quality and splinter-free edge — the whole point of a track saw is glue-ready edges; thin-kerf blades and tight rail tolerances matter most here.
• Cut depth and bevel — most saws cut about 2 to 2-1/8 inches at 90 degrees; the Festool TS 60 leads at 2-7/16 inches. A bevel of negative 1 to 47 degrees is the standard to expect.
• Track system compatibility and length — confirm rail length covers an 8 ft sheet; check whether your saw fits other brands' tracks (Makita and Bosch are notably flexible).
• Dust collection — look for 90 percent or better capture and a port that fits your vac hose; this keeps your cut line visible and your shop clean.
• Riving knife and anti-kickback safety — a riving knife plus active anti-kickback (Festool KickbackStop, DEWALT and Kreg mechanisms) is a real safety upgrade.
• Corded vs cordless — corded means unlimited runtime; cordless means freedom but battery management. Match the platform to tools you already own.
• Whether tracks are included — many premium saws sell the rail separately; budget the rail into your total cost.

What matters less than marketing implies: track ecosystems are somewhat proprietary, but the practical lock-in is smaller than brands suggest. Several saws (Makita, Bosch) ride multiple brands' rails with a minor adjustment, and aftermarket rails exist. Do not let rail anxiety alone dictate your purchase.

FAQ

What is the best track saw overall in 2027? The Festool TS 60 KEB is our Best Overall. Its 2-7/16 inch cut depth, KickbackStop safety, and unmatched edge quality lead the field, justifying its $725 price for serious woodworkers and cabinet shops.

What is the best value track saw? The Makita XPS01 cordless track saw at $465 for the kit. It delivers near-Festool plunge smoothness and clean edges at roughly a third of the flagship price, and its rail works with Festool and Bosch tracks too.

Do I need a riving knife on a track saw? A riving knife meaningfully reduces kickback risk, especially in solid hardwood. The DEWALT DCS520, Kreg ACS, and TS 55 include one; if you cut a lot of thick stock, prioritize a saw that has it.

Are track saw rails cross-compatible between brands? Sometimes. Makita and Bosch saws ride Festool, Triton, and each other's rails with a small adjustment, while DEWALT and Festool rails are more proprietary. Always verify before assuming compatibility.

Corded or cordless — which should I choose? Choose corded (Festool TS 60, DEWALT DWS520, Bosch) for unlimited runtime in a shop. Choose cordless (Makita, DEWALT DCS520, Milwaukee) for job-site freedom, ideally matching a battery platform you already own.

How deep can a track saw cut? Most cut about 2 to 2-1/8 inches at 90 degrees, enough for any sheet good and most solid stock. The Festool TS 60 leads at 2-7/16 inches, useful for thicker hardwood and double-stacked panels.

Bottom Line

The Festool TS 60 KEB at $725 is the Best Overall track saw of 2027 — the deepest, cleanest, safest cuts you can buy. The Makita XPS01 at $465 is the Best Value, delivering most of the Festool magic cordlessly for far less. Job-site crews should match a cordless saw to their battery platform, while shops chasing unlimited runtime will love the corded DEWALT DWS520 or Bosch GKT13-225L.

Use the decision tree above to route your budget, power preference, and ecosystem to the right pick.

Sources

• Pro Tool Reviews — Festool TS 60 K Track Saw
• Pro Tool Reviews — Makita XPS01 Cordless Track Saw Review
• Pro Tool Reviews — Festool TSC 55 KEB Track Saw Review
• Pro Tool Reviews — Bosch GKT13-225L Track Saw Review
• Tool Box Buzz — DEWALT FLEXVOLT DCS520 Track Saw Review
• A Concord Carpenter — DEWALT, Festool and Makita Track Saw Head to Head
• Milwaukee Tool — M18 FUEL 6-1/2 in. Plunge Track Saw 2831-20
• DEWALT — DCS520T1 60V MAX TrackSaw Kit spec page
• Festool USA — TS 55 FEQ-F-Plus Track Saw spec page
• Kreg Tool — Adaptive Cutting System Plunge-Cut Track Saw ACS-SAWBB
• WEN Products — CT1065 / 36725 Plunge Cut Track Saw

*Track saw review — track saw reviews, rating, best track saw 2027, and a review of the top plunge-cut picks for buyers.*